Summer Starts Here - Save up to 70%
Hollywood Racks Baja Trunk Bike Racks Review - 2017 Hyundai Accent- Video
Hi everyone. It's Evangeline here at etrailer. And today, we're gonna be taking a look at our trunk mounted bike rack, which is the Hollywood Racks Baja trunk mounted bike rack here on our 2017 Hyundai Accent. So, you can get this as a two-bike or a three-bike carrier. They're gonna work the exact same way, have the exact same specs. The only difference is one can carry two bikes, the other can carry three bikes. more
1/17/2022 9:52:32 PM
Thule Raceway Trunk Bike Rack Review - 2013 Hyundai Accent- Video
Today on our 2013 Hyundai Accent 4-door Sedan well be test fitting the Thule Raceway 2 Bike Carrier part number TH9001. To fit this trunk carrier to our vehicle we need to set our fid dial setting at number seven so that we have the proper spread of the carriers arms. Well position the rack on top of the vehicles trunk lid. Well secure the clips with the top cables at the top edge of our trunk door. Well secure the bottom cables on the bottom edge of our trunk lid and we need to make sure that the bottom arms are resting on the upper tier of the bumper. With everything in position well use the ratcheting knobs on the ends of the carrier to tighten down our cables. more
6/11/2013 10:57:39 AM
Thule Passage Trunk Mounted Bike Rack Review - 2013 Hyundai Accent- Video
Today on our 2013 Hyundai Accent, we'll be test fitting the Thule Passage 2-bike carrier trunk mount, part number TH910XT. Before we begin our test fit, we first need to check the Thule fit guide in the included instructions to determine what number our fit dial needs to be at. We'll set the fit dial to 7, according to the fit guide included in the instructions. We'll place the carrier onto the vehicle, putting the top hooks at the top part of the trunk, the side hooks to the side part of the trunk, and the bottom hooks to the bottom part of the trunk. We'll then tighten down the straps to secure the carrier to the vehicle. And now we're ready to load our bike. more
6/11/2013 10:38:24 AM
Thule Raceway Trunk Bike Rack Review - 2013 Hyundai Elantra- Video
Today, on our 2013 Hyundai Elantra, well be test fitting the Thule Raceway, Two-Bike Carrier, Part Number TH9001. Before we begin our test fit, we need to refer to the instructions or to the Thule fit guide. We need to find out what our dial needs to be set on. In this case, it needs to be set on dial seven.Once we have our dial set, we can then go ahead and place the carrier on to our trunk. The bottom of our carrier needs to sit on the upper tier of our bumper. Now, we can go ahead and place the top hooks on the top part of the trunk. more
5/29/2013 4:07:15 PM
Thule Passage Trunk Mounted Bike Rack Review - 2013 Hyundai Elantra- Video
Today on our 2013 Hyundai Elantra, we'll be test fitting the Thule Passage 2-bike carrier, part number TH910XT. Before we begin the test fit, we need to check the instructions or the Thule fit guide to determine where our fit dial should be set at. For this vehicle we have the dial set at dial number 7. We'll go ahead and set the carrier onto the trunk, and put the top hooks to the top of the trunk. We want to make sure that the lower part of our bike rack is sitting on the upper tier of our bumper. We'll then set the side hooks to the side of the trunk below the tail lights, and the bottom hooks to the bottom of the trunk. more
5/29/2013 1:47:41 PM
Hollywood Racks Baja 2 Trunk Bike Rack Review - 2013 Hyundai Elantra- Video
Today on our 2013 Hyundai Elantra well be test fitting the Hollywood Racks Baja 2-Bike Carrier, part number hrb2. To begin our test fit well go ahead and fit the carrier onto our vehicle. We want to make sure that the bottom part of the carrier is resting on the upper tier of the bumper. At this point, we can judge where our arms need to be. They need to be level or slightly inclined. We can use the levers on the side of the bike rack to adjust as necessary. more
5/28/2013 1:26:47 PM
Hollywood Racks Expedition Trunk Bike Rack Review - 2013 Hyundai Elantra- Video
Today on our 2013 Hyundai Elantra well be test fitting the Hollywood Racks Expedition 2-Bike Carrier, part number hrf6-2. To begin our test fit well place the carrier onto the trunk of our vehicle. We want to make sure that the lower part of our carrier is on the upper tier of our bumper. At the top of the carrier, the bike has a high pitch which is ideal for being able to go over a spoiler. Once we have that set, we can go ahead and set our hooks in place. Well set the top hooks at the top part of the trunk, the side hooks at the sides just below the taillights, and the bottom hooks at the base of the trunk. more
5/28/2013 1:26:02 PM
Filter Videos
Filter Videos
